Free planning tool

Free DTF Gang Sheet Calculator

Estimate how many copies of one design fit on a gang sheet. Enter your sheet size, final print dimensions, spacing, and edge margin. Compare a 90° rotation and add your own sheet price to estimate cost per transfer. No artwork upload or account is needed.

Use inches at the final print size. Dimensions must be greater than zero; margin and gap may be zero. Fractions such as 0.125 are supported.

Sheet size
Design size
Cost (optional): edit example prices

Editable example prices, not supplier quotes. Replace them with your own sheet price and shipping, or clear them to estimate fit only.

Optional example costs

Find a shop for your gang sheet

Browse documented services. Confirm printable sizes, artwork requirements, pricing, and current turnaround directly with the supplier.

Find Local Pickup Options →Explore Same-Day Options →Browse All DTF Shops →

Shops in these results list both services. Confirm that your gang-sheet order qualifies for pickup or same-day service, including order cutoffs and turnaround, before ordering.

Planning estimate

8 prints

Example layout. Edit the inputs and calculate your own estimate.

Layout
2 columns × 4 rows
Orientation
Standard
Estimated cost per print
$3.75

Cost uses the editable example prices or your entries. It is not a supplier quote.

Schematic layout, not to scale or a print-ready file.

Planning estimate only. Always verify dimensions and file setup with your supplier before ordering.

How many designs fit on a 22 × 60 gang sheet?

With 0.25-inch edge margins and 0.25-inch gaps, a 22 × 60-inch sheet fits eight 10 × 12-inch designs in two columns and four rows. Your result changes with design size, printable width, spacing, and layout.

How the gang sheet estimate works

We subtract the edge margin from both sides of the sheet, count how many designs fit across and down with your selected gap, and compare a 90° rotation if enabled. This is a grid estimate for repeated rectangular designs. It does not combine different design sizes or create a print-ready file; a supplier's artwork builder may fit a different number.

Before you order transfers

Measure artwork at its final print size. Confirm the supplier's printable width, edge margin and cutting gap. Check file resolution, background requirements, sheet sizes, current pricing and turnaround before ordering.

Gang sheet calculator FAQs

How much space should I leave between transfers?

Use your supplier's required cutting gap and edge margin. The calculator starts at 0.25 inches for each; these are planning defaults, not a universal production rule.

Does rotating designs fit more transfers?

Sometimes. With rotation enabled, the calculator compares an all-upright grid with an all-rotated grid and shows the higher count. Mixed-orientation nesting may yield a different result.

Can I mix different design sizes?

This calculator estimates repeated copies of one size. Use your supplier's gang-sheet builder for mixed artwork. Separate full-sheet capacities cannot simply be added together.

Is the cost per transfer a supplier quote?

No. It divides the editable sheet price and shipping by estimated capacity. Confirm the actual order price, taxes and any other charges with your supplier.